ON-OFF Control / Forestry Crane Valve / Control Valve for Log Haulers with 8 Functions
- Manual lever valves connect and disconnect hydraulic lines regardless of the direction of flow
- Function: Start, stop, and direction of oil flow in the working ports
The 8 crane functions are conveniently located within easy reach of both hands. The valve in this design has proven itself over many years and is indestructible. All necessary primary and secondary safety measures for the safe operation of the machine are in place.
The control unit is set up as follows:
- The left cross lever controls the rotator, boom, and grapple
- The right-hand cross lever controls the swivel drive, the articulated arm, and the telescopic section
- The two separate levers are used to control the supports
- The rotator, lifting arm, telescopic arm, articulated arm, and swivel drive functions are additionally protected by shock valves and can be adjusted separately depending on the application
- The levers are included in the package.
Data sheet specifications:
A = 607.00 mm
B = 444.00 mm
C = 125.80 mm
Wiring Diagram
Consumer A/B = R 1/2" screw-in thread
Pump P = R 1/2" screw-in thread
Tank T = R 3/4" screw-in thread
Technical Information:
Model = Single-valve, cast steel, contamination level 10 per NAS1638
Operating pressure set to 210 bar
Max. flow rate = 80 l/min
Control Piston Function: 8 x double-acting
Internal leakage = approx. 15 cm³/min at 120 bar
Nominal operating pressure A - B = 300 bar
Nominal operating pressure P - N = 250 bar
Nominal operating pressure T = 50 bar
Oil temperature = -15°C to +80°C
Applications:
- Forestry machinery
- Rear-mounted excavator
- Drilling equipment
Additional configurations available upon request