Hydraulic hose 4SH DN25 - 1" SAE Flange 6000 psi - Straight - Straight
- High operating pressure
- Available by the meter
- MSHA approval
- Can only be assembled with interlock fittings (with anti-pull-out protection)
- Sturdy
- More wear-resistant. Ozone- and oil-resistant outer jacket
- Crimped on both ends. Tested and marked.
- New merchandise from current production
Data Sheet Specifications and Technical Information:
Left-hand fitting: 1" SAE flange, 6000 psi. D = 47.60 mm
Right-hand fitting: 1" SAE flange, 6000 psi. D = 47.60 mm
Hose outer diameter = 38.40 mm
Inner diameter of hose = 25.40 mm
Max. operating pressure = 380 bar
Bending radius = 340.00 mm
Tread = abrasion- and weather-resistant synthetic rubber
DIN = DIN/EN 856
Reinforcement = four high-strength steel wire mesh layers
Operating temperature = -40°C to +100°C (max. +125°C)
Pressure = 1520 bar
Core = oil-resistant synthetic rubber
Applications:
- Mineral- and glycol-based fluids
- Garden Equipment
- Hydraulic systems
- Agricultural equipment
- Vegetable-based and mineral-based lubricants
- Crude oil. Heating oil. Cooling water. Compressed air
Additional information:
Under the Distance Selling Act, no right of withdrawal or return is granted for hydraulic hoses, as they are custom-made.