Reversing Gearbox / Reversing Gear - Gear Ratio 1:1 - 1 x Hollow Shaft, 1 x Stub Shaft
- A reversing gearbox is used to change the direction of rotation of a power take-off shaft
- At the same time, the rotational speed is increased or reduced.
- The transmission cannot be shifted
- For horizontal or vertical installation, the lower oil plug on the side serves as the oil level indicator
- The transmission must not be operated without the vent hole installed at the top, as otherwise oil will leak due to excess pressure inside the transmission
- This transmission must be secured to prevent it from rotating and slipping downward
Data sheet specifications:
A = 215.00 mm
B = 170.00 mm
C = 245.00 mm
D = 85.00 mm
Technical Information:
Hollow Shaft Drive = R 1 3/8" Z=6
Hollow Shaft Output = R 1 3/8" Z=6
Max. power (kW) = 60
Housing material = Solid cast steel
Oil capacity = 0.45 liters - Type 85W90
Additional information:
- Please note that this transmission is shipped without oil
- You can also find the right oil in our store