Front Loader Control Valve 95 l/min - with 1500 mm cable - 1 pushbutton - double-acting with multi-coupler - Load Sensing
- Front loader valve for mounting on the front loader console
- Includes a cross-shift lever with an electric switch, 1,500-mm cable assemblies, and a Faster multi-coupler from the 2PS06-4-12G-F-C series (fixed section).
- The components are not installed.
- The valve is connected in parallel and has a load-holding valve in each section.
- It features load sensing and has two double-acting functions, one of which has a neutral position and a locking mechanism.
Data sheet specifications:
A = 88.00 mm
B = 106.00 mm
C = 296.50 mm
D = 193.00 mm
Wiring Diagram
Consumer A/B = R 1/2" screw-in thread
Pump P = R 1/2" screw-in thread
Tank T = R 3/4" screw-in thread
Load Sensing LS = R 1/4" screw-in thread
Cable length = 1,500.00 mm
Technical Information:
Number of "on/off" functions = 1 button
Construction = Valve block made of high-strength cast iron, valve spool with hard chrome plating, NBR seals
Max. operating pressure: 250 bar, max. return pressure (t): 10 bar
Pressure fluid = mineral oil in accordance with DIN 51524 (HLP) with a viscosity of 10–75 mm/s²
Max. flow rate = 95 l/min
Control piston function = 2 x double-acting
Max. permissible contamination level = Class 9 according to NAS 1638 or 19/16 according to ISO 4406
Oil temperature = -20°C to +80°C