Front Loader Control Valve 95 l/min - with 1500 mm cable - 0 pushbuttons - double-acting, including pressure-transmission cartridge, 1 of which has a float position
- Front loader valve for mounting on the front loader console
- Includes a cross-shaped lever with an electric switch and 1,500-mm cable pulls
- The components are not installed.
- The valve is connected in parallel and has a load-holding valve in each section.
- It features a power beyond mechanism and has two double-acting functions, one of which includes a neutral position and a locking mechanism.
Data sheet specifications:
A = 88.00 mm
B = 106.00 mm
C = 296.50 mm
D = 193.00 mm
Wiring Diagram
Consumer A/B = R 1/2" screw-in thread
Pump P = R 1/2" screw-in thread
Tank T = R 3/4" screw-in thread
Cable length = 1,500.00 mm
Technical Information:
Number of "on/off" functions = 0 buttons
Construction = Valve block made of high-strength cast iron, valve spool with hard chrome plating, NBR seals
Max. operating pressure: 250 bar, max. return pressure (t): 10 bar
Pressure fluid = mineral oil in accordance with DIN 51524 (HLP) with a viscosity of 10–75 mm/s²
Max. flow rate = 95 l/min
Control piston function = 2 x double-acting
Max. permissible contamination level = Class 9 according to NAS 1638 or 19/16 according to ISO 4406
Oil temperature = -20°C to +80°C