Wood Splitter Control Valve 50 l/min - with hydraulic shut-off and high-speed mode
- Ideal for building a wood splitter
- The advantage
The wood-splitting function has two stages. In the first lever position, the piston extends at normal speed and with maximum force. In the second lever position, the piston extends at a higher speed but with less force. This allows the entire splitting process to be completed in significantly less time.
Data sheet specifications:
A = 64.00 mm
B = 75.00 mm
C = 200.00 mm
Wiring Diagram
Consumer A/B = R 1/2" screw-in thread
Pump/Tank P/T = R 1/2" screw-in thread
Technical Information:
Model = Single-valve cast steel, contamination level 19/16 per ISO 4406
Operating pressure set to 180 bar
Pressure relief valve, adjustable up to 300 bar
Max. flow rate = 50 l/min
Control Piston Function: 1 x double-acting with rapid stroke
Internal leakage = approx. 3 cm³/min at 100 bar
Nominal operating pressure A - B = 300 bar
Nominal operating pressure P - N = 250 bar
Nominal operating pressure T = 25 bar
Oil temperature = -20°C to +80°C
Usage:
- The control lever is locked in the piston return position and thus retains its control function.
- As soon as the cylinder piston reaches its end stop, the change in pressure in the hydraulic circuit releases the lock, and the lever automatically snaps back to the neutral position.
- This allows the operator to have both hands free while the piston is returning.
- In addition, this control unit is equipped with a high-speed mode.