Wood Splitter Control Valve 80 l/min - with High Speed / Rapid Feed
- Ideal for building a wood splitter
- The print continuation cartridge must be ordered separately along with this item
- This cartridge is required when installing a control valve in an existing hydraulic circuit that already contains a control valve
- The advantage
The wood-splitting function has two stages. In the first lever position, the piston extends at normal speed and with maximum force. In the second lever position, the piston extends at a higher speed but with less force. This allows the entire splitting process to be completed in significantly less time.
- Attention:
This valve must be pushed into the zero position using a mechanical mechanism; to do this, simply press against the bolt provided for this purpose (see picture).
Using this method, the splitting stroke for short logs can also be easily adjusted using a threaded rod or similar device.
Data sheet specifications:
A = 73.00 mm
B = 108.00 mm
C = 261.50 mm
Wiring Diagram
Consumer A/B = R 1/2" screw-in thread
Pump P = R 1/2" screw-in thread
Tank T = R 3/4" screw-in thread
Power Beyond N = R 3/4" Screw-in Thread
Technical Information:
Model = Cast Steel Single-Valve
Operating pressure set to 180 bar
Pressure relief valve, adjustable up to 300 bar
Max. flow rate = 80 l/min
Control Piston Function: 1 x double-acting with rapid stroke
Internal leakage = approx. 10 cm³/min at 100 bar
Nominal operating pressure A - B = 300 bar
Nominal operating pressure P - N = 250 bar
Nominal operating pressure T = 50 bar
Oil temperature = -20°C to +80°C
Usage:
- Pull the lever all the way back = Extend the cylinder at normal speed
- Pull the lever back to the first position = high-speed mode (the greater the ratio of the piston head to the piston rod, the higher the stroke speed in high-speed mode)
Example:
A 100-mm piston crown and a 50-mm piston rod result in a 75% increase in speed