4.9 cm³/rev x 4-way gear-type flow divider—with balancing valves and additional suction valves in each section
- These flow dividers have the advantage of balancing flow at both end points of the system.
- When the cylinder is extended, pressure equalization occurs through each section valve as fluid flows from the inlet to the outlet side.
- When the cylinder is retracted, compensation occurs via the suction valves by “collecting” the oil flows.
- Double-acting cylinders are used here.
Data sheet specifications:
A = 57.00 mm
Li = 434.00 mm
Lt = 453.00 mm
Technical Information:
Max. operating pressure: 220 bar
Inlet flow rate in l/min per element
minimum (l/min) = 5.5
Recommended (l/min) = 11.0
maximum (l/min) = 27.0
Displacement per section in ccm/rev = 4.9
Applications:
- Platforms
- Opening and closing hatches (bulkheads)
Available in sizes BG0, BG2, and BG3 upon request