6.5 cm³/rev Gear-Type Displacer, 2-Stage - with balancing valves and additional suction valves in each section
- These flow dividers have the advantage of balancing flow at both end points of the system.
- When the cylinder is extended, pressure equalization occurs through each section valve as the fluid flows from the inlet to the outlet side.
- When the cylinder is retracted, compensation occurs via the suction valves by “collecting” the oil flows.
- Double-acting cylinders are used here.
Data sheet specifications:
A = 63.00 mm
Li = 266.00 mm
Lt = 285.00 mm
Technical Information:
Max. operating pressure: 220 bar
Inlet flow rate in l/min per element
minimum (l/min) = 7.5
Recommended (l/min) = 14.0
maximum (l/min) = 32.0
Displacement per section in ccm/rev = 6.5
Applications:
- Platforms
- Opening and closing hatches (bulkheads)
Available in sizes BG0, BG2, and BG3 upon request