4.3 cm³/rev x 2-speed gear-type flow divider—with balancing valves and additional suction valves in each section
- These flow dividers have the advantage of balancing flow at both end positions of the system.
- When the cylinder is extended, pressure equalization occurs through each section valve as the fluid flows from the inlet to the outlet side.
- When the cylinder is retracted, compensation occurs via the suction valves by “collecting” the oil flows.
- Double-acting cylinders are used here.
Data sheet specifications:
A = 54.00 mm
Li = 248.00 mm
Lt = 267.00 mm
Technical Information:
Max. operating pressure: 220 bar
Inlet flow rate in l/min per element
minimum (l/min) = 4.5
Recommended (l/min) = 9.5
maximum (l/min) = 23.0
Displacement per section in ccm/rev = 4.3
Applications:
- Platforms
- Opening and closing hatches (bulkheads)
Available in sizes BG0, BG2, and BG3 upon request