9.8 cm³/rev Gear-Type Flow Divider (2-Way) - Without Compensating Valve
- The application without a balancing valve is the most versatile.
- These flow dividers can compensate for internal leaks.
- When the cylinders reach their end positions, the hydraulic system must be operated for a certain period of time "X" until the maximum pressure peak is reached, so that the cylinder end positions can be balanced.
- These volume dividers are the most affordable and most commonly used options.
Data sheet specifications:
A = 76.00 mm
Li = 292.00 mm
Lt = 311.00 mm
Technical Information:
Max. operating pressure: 200 bar
Inlet flow rate in l/min per element
minimum (l/min) = 11.0
Recommended (l/min) = 20.0
maximum (l/min) = 41.0
Displacement per section in ccm/rev = 9.8
Applications:
-Pressure amplification (limited)
-Driving a motor vehicle
-Lifting containers
-Opening and closing hatches (bulkheads)
-Platforms and Lifts
-Lubrication systems (usually consisting of several sections)
Available in sizes BG0, BG2, and BG3 upon request