Hydraulic cylinder with fixed eye, 20/450 stroke—single-acting
- All mounting types are possible
- Fully assembled
- Cylinder tube material: St52-3
- Piston rod material: 18 MNV5 steel
- Maximum operating pressure: 250 bar
- Max. speed: 0.5 m/s
- Maximum radial load: 10% of the axial force
- Ready to use right away
- Temperature range for the seals: -25°C to +85°C
- Compatible with mineral-based hydraulic oil
Data sheet specifications:
Stroke = 450.00 mm
EL = 600.00 mm
Ø R = 35.00 mm
Ø S = 20.00 mm
G = M 14x1.5
U = 22.00 mm
M = 23.00 mm
kg = 3.60
Ød = 16.00 mm
Technical Information:
Bar diameter = Ø 20.00 mm
Stroke = 450.00 mm
Oil connection = M 14x1.5
Compressive force at 180 bar = 0.56 metric tons
Additional information:
The “Stroke (mm)” column does not always indicate the actual stroke length of the piston rod or cylinder tube, but rather the maximum achievable stroke length.
Construction: Bolted and welded; head nut and guide made from a single piece
You can weld something onto the cylinder (tube and piston rod) yourself; the piston rod has already been prepared for this. Before welding, the cylinder must be extended using compressed air.